iFi Audio micro iTube2

The original iTube became the ‘go to’ tube buffer for any and every home audio system. We have redesigned the micro iTube2 with new parts and new circuitry using trickle-down technology from the flagship ‘Pro’ series. Only the GE5670 tube remains.

The micro iTube2 is a tubed output stage, tube preamp, tube buffer AND an impedance-matching device all in one. There is nothing like it. You can put the micro iTube2 before a solid-state preamp and another one after it, creating the effect of tubing the whole audio chain. Or you can choose to simply use the micro iTube2 as a very high-quality preamp by itself.

The micro iTube2 sounds by and far, like a tube amplifier ‘done right with the inimitable magic of tubes.‘ Tonality and heft, especially in the mid-range and bass frequencies are increased to elevate the whole audio system from $100k to $1k. The micro iTube2 injects a serious does of tube magic into any audio system.

‘Magic’ of SET, Push-Pull or Classic Tube sound
	In the ‘magic of tubes’ listening stakes, the iTube2 offers the listener the choice of different key sonic signatures: – a Single-Ended Triode power amplifier; – a Push-Pull tube power amplifier; – a classic tube amplifier. Just to note from the iFi team – there is no ‘right’ setting. We advise you to set according to your systems synergy and your listening preferences.

Specifications
Tube:	NOS GE 5670×1
Maximum output:	> 7.75V (>+20dBu)
SNR:	119dB(A) re. 2V, buffer, 0dB Gain
DNR:	31dB(A) re. +20dBu, buffer, 0dB Gain
THD & N:	< 0.009% (re. 2V, buffer, 0dB Gain, A- weighted)
Frequency Response:	< 10Hz -to > 200kHz (-1dB) 20Hz – 20kHz (+/-0.003dB)
Input impedance:	1M ohm Direct Tube Buffer 100k ohm Pre-Amplifier with Volume Control
Output stage output impedance:	<1 ohm
Corrected output impedance:	<150 ohm
Input voltage:	AC 100-240V, 50/60Hz
Power consumption:	<4W idle, 10W max
Dimensions:	175(l) x 67 (w) x 28 (h) mm
Weight:	278g (0.61lbs)